SCHOOL OF ENGINEERING AND ARCHITECTURE

History

The College of Engineering was established on July 23, 1963 starting with one-year general engineering course. Two years later, it started offering its first major program, which is Bachelor of Science in Civil Engineering. This program was given Government Recognition immediately after graduating the first batch of Civil Engineering graduates who achieved 100% passing in the Civil Engineering Board Examinations. This initial success of the college led to the offering of other engineering degree programs including Electrical, Mechanical, Chemical, Environmental and Sanitary Engineering and Industrial Engineering. To date, the College of Engineering maintains and continues to strengthen eight (8) major degree programs with Government Recognition, as follows: Bachelor of Science in Civil Engineering, 1968; Bachelor of Science in Mechanical Engineering, 1969; Bachelor of Science in Electrical Engineering, 1969; Bachelor of Science in Industrial Engineering, 1986; Bachelor of Science in Electronics and Communications Engineering (now Bachelor of Science in Electronics Engineering), 1991; Bachelor of Science in Computer Engineering, 2002; Bachelor of Science in Architecture 2003; Bachelor of Science in Aeronautical Engineering, 2009.

The first Dean of the College of Engineering (CEn) was Engr. Teresito Remollo who laid down the foundation for the College in its early stage of development. His achievements from the time he assumed the position in 1968 and until his retirement in 1985, gained the recognition for HAU as a foremost engineering school in the region. The work he started was continued by his predecessors. He was succeeded by Engr. Geromin T. Nepomuceno, Jr. who was Officer-in-Charge of the College from 1985 to 1987. Engr. Renato Santiago held the position of Officer-in-Charge from 1987 to 1990 and Engr. Abigail Arcilla was the Acting Dean from 1990 to 1992. Engr. Ruby P. Henson held the position of the Dean from 1992 to 1999 and then Engr. Roman A. Palo in 1999 to 2005. CEn then became CEA - College of Engineering and Architecture in 2003. Engr. Abigail P. Arcilla was the Dean in 2005 to 2010; Dr. Maria Doris C. Bacamante in 2010 to 2016.  CEA then became SEA –School of Engineering and Architecture in 2017. Dr. Ruby P. Henson was the Dean in 2016-2017; Dr. Felicito F. Caluyo in 2017-2018; and Dr. Jay Jack R. Manzano in 2018-2019.   Dr. Filipina I. De Guzman holds the deanship position from 2019 to present.

In all its years of existence, the College of Engineering has been committed to the objective of "providing well-rounded professional training to students who can make a definite contribution to the industrialization and economic progress of the Philippine through applied Science and Technology." Hence, the curricula for the different programs are so designed not only to conform to CHED, DECS-TPEAE curricular guidelines but also to ensure that Engineering graduates have the necessary academic background in terms of knowledge both in the technical and social disciplines as well as field experience for the specific area of specialization. In line with this, engineering graduates are required to undergo apprenticeship training in the industries to enhance their field of experience.

The training that engineering students obtain is further enriched by their involvement in extra-curricular activities and this is made possible through membership in student organizations. There are nine (9) student organizations based in the college most of which are accredited student chapters of national professional organizations. These are the Philippine Institute of Civil Engineers (PICE); Integrated Institute of Electrical Engineers (IIEE); Integrated Electronics and Communications Engineers of the Philippine (IECEP); Philippine Institute of Industrial Engineers (PIIE); Philippine Society of Mechanical Engineers (PSME); Institute of Computer Engineers of the Philippines (ICEPEP); United Architects of the Philippines Student Auxiliary (UAPSA); Society of Aerospace Engineers of the Philippines (SAEP) and Student Association for General Engineering (SAGE). The realization of the objectives of the college is evidenced by the growing number of engineering graduates and professionals that the institution has produced. The college also boasts of a number of engineering board topnotchers.

The College of Engineering has gone a long way since 1963. The four-storey building for the college marks the genuine commitment of HAU in strengthening engineering education. The edifice, named the Sacred Heart Building, houses lecture rooms, an audio visual room, and all the engineering laboratories as follows: Soils, Material Testing, Hydraulics, Mechatronics, Mechanical Engineering, Electrical Engineering, Electronics, Chemistry, Physics and Computer laboratories, the latter including a CADD Center, Industrial Engineering and Aeronautical Engineering. An adjacent building, called the Archbishop Pedro Santos (APS) building, houses the Drafting Rooms used by the Architecture students. Alongside the continuous upgrading of facilities, the college plans to pursue a comprehensive faculty development program in line with the objective of upgrading instruction. The college also exerts considerable effort in keeping up with the technological pace through the application of computer technology in instruction and research. Aware of the existing resources and the demand of the external environment, the activities and programs of the college are being expanded so as not to be limited to the traditional academic scope but will consider the demands of the external environment through academe-industry linkages and other forms of community involvement.

In April 1995, the programs in the College of Engineering attained FAAP second-level (II) accreditation status through PAASCU. PAASCU Re-accreditation was attained in the school year 1998-1999. The Commission on Higher Education (CHED) awarded the two programs from the College of Engineering, namely: Electrical and Industrial Engineering departments as the Centers of Development (COD) in the region. PAASCU Level III Accreditation was granted in the School Year 2004-2005 for CE, EE, IE & ME. In School Year 2009-2010, in addition to the Electrical and Industrial Engineering departments, the Civil Engineering department was also granted Center of Development (COD) by CHED.  The Computer Engineering Program was granted PAASCU Candidate Status in SY 2010-2011 which qualifies it for a formal survey visit for Level I in the following school year; and a Level II reaccredited status in February 2020. Both Architecture Program and Aeronautical Engineering Program were granted PACUCOA Level I Accreditation in 2018 and 2019, respectively.

The School of Engineering and Architecture realizes the importance of its role in present times of making engineering education relevant as it continues to support national development efforts.

Vision

A center of excellence in engineering and architecture education imbued with Catholic mission and identity serving as a role-model catalyst for countryside development

Mission

The School shall provide accessible quality engineering and architecture education leading to highly competent professional; continually contribute to the advancement of knowledge and technology through research activities; and support countryside development through environmental preservation and community involvement.

Objectives

In its pursuit for academic excellence and to become an authentic instrument for countryside development, the School of Engineering and Architecture aims to achieve the following objectives:

  1. To provide students with fundamental knowledge and skills in the technical and social disciplines so that they may develop a sound perspective for competent engineering and architecture practice;
  2. To inculcate in the students the values and discipline necessary in developing them into socially responsible and globally competitive professionals;
  3. To instill in the students a sense of social commitment through involvement in meaningful community projects and services;
  4. To promote the development of a sustainable environment and the improvement of the quality of life by designing technology solutions beneficial to a dynamic world;
  5. To adopt a faculty development program that is responsive to the continuing development and engagement of faculty in research, technopreneurship, community service and professional development activities both in the local and international context;
  6. To implement a facility development program that promotes a continuing acquisition of state of the art facilities that are at par with leading engineering and architecture schools in the Asia Pacific region; and,
  7. To sustain a strong partnership and linkage with institutions, industries, and professional organizations in both national and international levels.

PEOS and POS

Within a few years after graduation, graduates of our Engineering programs are expected to have:
  1. Demonstrated technical competence, including design and problem-solving skills, as evidenced by:
    • The sound technical designs and systems that conform with existing laws and ethical standards they produced
    • The recognition and certification they received for exemplary achievement



Read More

Program Offerings

Undergraduate

Bachelor of Science in Aeronautical Engineering

Learn more

Bachelor of Science in Electronics Communication Engineering

Learn more

Bachelor of Science in Electrical Engineering

Learn more

Bachelor of Science in Industrial Engineering

Learn more

Bachelor of Science in Mechanical Engineering

Learn more
Apply Now!

Graduate

Master in Engineering Program

Majors in:

  • Electrical Engineering
  • Industrial Engineering
Learn more

Master of Science in Electronics and Communications Engineering

Learn more
Apply Now!

Administration and Staff

Dean
Dr. Filipina I. De Guzman
 Local 1184
Associate Dean
Dr. Richard L. Figueroa
 Local 1194
Program Chairperson, Architecture
Ar. Franz Allan M. Rodriguez
 Local 1332
Program Chairperson, Aeronautical Engineering
--
 Local 1196
Program Coordinator, Civil Engineering
Engr. Angelito N. Angeles
 Local 1196
Program Coordinator, Computer Engineering
Engr. Niyo Kenn R. Jimenez
 Local 1196
Program Coordinator, Electrical Engineering
Engr. Mark Angelo M. Quintana
 Loc. 1196
Program Chairperson, Electronics Engineering
Engr. Cherry Ann P. Navarro
 Local 1196
Department Coordinator, General Engineering
Engr. Rechelle Ann M. Gundran
 Local 1332
Program Chairperson, Industrial Engineering
Engr. Edward P. Lacson
 Local 1195
Program Coordinator, Mechanical Engineering
Engr. Marcelo O. Renalito
 Local 1196
Coordinator, Industry-Academe Linkage
Engr. Nikolai C. Cayanan
 Local 1195
School Secretary
Ms. Ritchell Ann D. Fernandez
 Local 1194
Aeronautical Engineering Laboratory Staff
Engr. Arjhon S. Acordon
 Local 1046
Civil Engineering Laboratory Custodian
Mr. Ronnie S. Dungca
 Local 1197
Chemistry Laboratory Custodian
Ms. Princess Blossom L. Gozum
 Local 1108
Computer Engineering Laboratory Custodian
Mr. Ivan P. Macapagal
 Local 1153
Computer Laboratory Custodian
Mr. Walter D. Gonzales
 Local 1154
Electronics Engineering Laboratory Custodian
Engr. Camille Joie P. Basa
 Local 1152
Electrical Engineering Laboratory Custodian
Mr. Johanan G. Dueñas
 Local 1153
Mechanical Engineering Laboratory Custodian
Mr. Charlie Joseph M. Castillo
 Local 1168
Physics and Industrial Engineering Laboratory Custodian
Mr. Vergel D. Sinio
 Local 1107 Physics Lab., Local 1399 IE Lab.
Soil Mech Laboratory Custodian
Mr. Angelo T. Castro
 Local 1076

News & Announcements

Financial Management/Planning for Students

Read More

3D Building Scanning – HAU-Architecture Department and Limang Siglo Commence Digital Documentation Activities

Read More